ELF 2 Cutting MaxPro200 Hypertherm Edge Pro Ti

Farley ELF 2 STD Plasma Machine Special

Farley LaserLab Australia is upgrading an old favourite to the new generation of plasmas with the ELF 2.

As many workshop will remember the original ELF 1 Plasma cutting machine being a staple in their factory for 10+ years with its heavy duty design and low pricing, it became one of Farley LaserLab's most popular machine in the Australian market, and now we are bringing it back to be one of the most affordable heavy duty plasma cutting machines on the market today.

With a new design the ELF 2 is now a table machine, with its rails now mounted on the machine it provides you a more space friendly option for your workshop. The table mounted rails escape the issues of heat distortion through its unique design features and capped temperature control to insure your table lasts you longer than other machines.

Coming in 2 options with the Hypertherm Max Pro Range and the Hypertherm High Definition Range.

 

ELF 2 STD ADVANTAGES

UPGRADEABLE - If you want to start off small with the Hypertherm PowerMax Plasma to grow your business then at a later date upgrade to a larger system all you need to do is change the Plasma and off you go. If you want to upgrade to the Hypertherm High Definition Plasma all you need to do is change the Plasma & Height Lifter and you are ready.

And you still can keep your smaller plasma cutter in your workshop to use as your handheld system, so you are not losing out on anything and not double paying for another table, controller and etc. when it is all there ready to go.

LONGER LASTING CONSUMABLES -  With the Hypertherm Controller and Height Sensor it automatically changes the height of your torch to suite the amount of use of your plasma consumables which means you do not need to change them straight away. Unlike other systems which you will have to fiddle around with the controller to get the optimum torch height levels if it has the option at all.

So that means you will be saving a lot of money on your plasma consumables!

EASIER TO USE - With the Edge Connect Controller it makes plasma cutting easier than ever before with a large touch screen that directs you through a step by step cutting process utilizing Hypertherm's expert database of parameters which has been tested through 1000's of machines across the world.

Take advantage of the easy to use controller and cutting system and save on time, money and troubles.

QUALTIY CUTTING - Using Farley's ELF 2 plasma machine it gives you a superior cut than through its quality engineered and built motion system that meets and exceeds Hypertherm standard of cutting. This will prevent any extra work such as dross removal and cleaning from materials that have simple designs.

When quoting the same plasma torch the motion system provides a significant difference in the quality of cutting, so don't just look at the plasma torch, look at the machine as well and get some samples cut and you will see the difference.

HEAVY DUTY DESIGN - Farley's ELF 2 Plasma cutting machine is designed and built to hold and cut up to 60mm+ materials which gives you the reassurance that you can cut thick material like any quality job shop should provide.  

Make sure you check out the quality of the table as you might buy a Quality plasma but later realise you can not cut thick materials as the table will not hold it properly or cause heat distortion which will further ruin your motion system.

FULLY SUPPORTED - Farley LaserLab has an Australian team of engineers and technicians to deal with any questions that you may face with your machine with full warranties to give you the peace of mind that you are getting a quality machine with quality support.

Not only do you have the Farley Team, you can utilize Hypertherm's support network with cutting parameters and technical questions to support their controller, height sensor,software and plasma source. This means you get two large companies that will always be around to support your machine.

TRUE HOLE CAPABLE - With upgrades to the ELF 2 High Definition plasma cutting machine you get all the benefits of Hypertherm's True Hole Cutting that will give you that extra edge in quality cutting which will help you win those extra jobs.

 

TECHNICAL DATA:

 

  ELF 2 - Standard ELF 2 - High Definition
     
CNC Controller:                     Hypertherm Edge Connect Hypertherm Edge Connect
Height Controller:   Hypertherm Sensor THC Hypertherm Sensor THC      
CAM Software: Hypertherm Pronest LT CAM   Hypertherm Pronest CAM
Plasma Source: Hypertherm PowerMax & MaxPro range   Hypertherm XD range
Plasma:  up to Hypertherm Max Pro 200  up to Hypertherm 260XD 
     
Cutting Widths: 1.5m 1.5m
Cutting Lengths: 3m 3m
Profiling Speed: up to 20m/min up to 20m/min
Rapid Traverse: up to 20m/min up to 20m/min
Accuracy: +/- 0.2mm +/- 0.2mm
Repeatability: +/- 0.1mm +/- 0.1mm
      
Material Thickness     
Mild Steel:  up to 50mm (20mm Dross Free)  up to 64mm (32mm Dross Free)
Stainless Steel:  up to 20mm  up to 50mm (32mm Production)
Aluminium  not rated  up to 50mm (25mm Production)
     
 Bonus Features: Low initial Cost Automatic Gas Console 
  High Cutting Capacity True Hole Cutting Technology
  Lower Consumable Costs Rapid Part Technology
  Manual Gas Console Longer Laser Consumables
  Air / Air Cutting Cutting M/S, SS, AL
  Easy to Controller Easy to use Controller
  Upgradeable to XD quality Upgradeable
 
 Farley ELF 2 STD Machine
 
Hypertherm Edge Connect Controller
 
Hypertherm MaxPro 200 Plasma Source
 
Hypertherm Pronest LT CAM Software
 
32mm Mild Steel Cut Sample (MaxPro200)
 
 
 
 
 
 
 
 

 

 

 

Latest Machine Sales

Follow all the latest machines to be sold in Australia, and check for yourself the quality that you could use to help you improve your business.

Photo Gallery

more

Recent Posts